Material identity and gradeSample-to-lot traceabilityBatch documents and receipt
Home / Compare a raw material specification with its lot COA

Compare a raw material specification with its lot COA

Read acceptance requirements and lot results side by side, including method, units, revisions and missing records.

Put requirements and results in separate columns

A material specification tells the buyer which characteristics and limits are proposed for acceptance. A lot certificate records results or statements for one identified lot. Bachem describes how selected test results are presented on an analytical data sheet or certificate. To compare the documents, line up the characteristic, units, reporting basis and method reference. Mark a missing result as missing even when the specification contains a clear numerical limit.

Bachem · Quality control of amino acids and peptides

A circular feed bowl and guide rails are visible beside a row of containers.
Container feed and guide railsThe overview distinguishes container handling from the separate decision to release a particular lot.
Image creditsCompany footage
A researcher handles a sample at an enclosed analytical balance.
Balance and sample enclosureA weighing record documents a physical quantity. The buyer also needs the reporting basis used for the material.
Image creditsGiovanna Canu, Francesca Cirisano, Sofia Gambaro, CNR-ICMATE · Image source · CC BY 4.0 · Converted to WebP.

Verify the identity and version before comparing

Check that the product identifier on the certificate matches the quoted form and that its lot can be traced to the proposed delivery. Ask which specification revision applied at release. A certificate issued before a buyer introduced a new acceptance requirement may still be a valid document for its lot while leaving the new requirement open. Record that open point for the issuer rather than silently extending the release statement.

AAPPTec · Retrieving a COA by product lot number

Review a certificate that says only “conforms”

Decide whether the agreed purchase specification accepts a qualitative statement for the characteristic in question. If your comparison requires a numeric result, ask whether the issuer tested the lot and can provide the result, units and supporting method reference. If the particular value is unavailable, keep that limitation in the approval record. This avoids copying a catalogue limit into the column reserved for a measured lot result. Document whether an additional result is needed before the material can be accepted.

AAPPTec · Retrieving a COA by product lot number

Worked example

If the purchased specification was revised after the offered lot was assessed, compare the effective dates and changed requirements. Ask the material reviewer whether the older lot evidence is adequate for the proposed purchase. Record the decision against the specific lot and specification revision.

Prepare your inquiry

Compare lot results against the specification version used for the purchase.

Select the items you want to ask about.

Certificates of analysis

When a peptide raw material arrives as a lyophilized powder, match the lot on the container to the COA. The catalog specification and the lot certificate serve different purchasing decisions.

Read a COA